< Назад к списку вакансий

Mechanic I - Operations UP4

Сфера деятельности:

Тип должности: Permanent

Тип занятости: Full - Time

Место расположения: North Little Rock, AR

Страна: United States

 Job:                     Mechanic I

 Department:    Technical Maintenance

Shift:                  12 hours night shift (alternating week-end)

 Division:           Consumer Products Division

 Location:         Manufacturing Plant – North Little Rock

 FLSA:                Non-Exempt

 Reports to:       Manager - Technical


To support production and processing activities through predictive, preventative, and repair maintenance in order to ensure the safety of personnel, the quality of finished goods and the performance of equipment.

 Educational, Mental, or Certification Requirements

  • High school education or GED required; 
  • Associate of Applied Science or equivalent electronics or electro-mechanical experience preferred; General or Industrial Technology curriculum.
  • May be required to pass confined space certification and/or forklift certification;
  • Minimum of 2-3 years of related industrial maintenance experience.

 General Job Duties

  • Ensure production/processing equipment is ready for use when needed and that equipment performs to pre-established standards;
  • Perform various maintenance responsibilities, repairs, fabrication and modifications to production/processing equipment; perform PM’s.
  • Answer calls to work on down lines;
  • Control machinery through computer terminals (login on the labor system when working on packaging lines);
  • Conduct tooling changes on machinery; 
  • Relieve cell members from running production lies where required;
  • Conduct and document productive/preventative maintenance procedures (refer to specific department duties) using CMMS.
  • Maintain knowledge and practice of Quality and Safety Policies, Line Manual Book Procedures, Good Manufacturing Procedures, and Reject Percent (refer to specific department duties);
  • Demonstrate knowledge of cylinders/valves/pneumatic equipment;
  • Coordinate projects when required by Technical manager, cell manager or engineer;
  • Communicate orally with cell manager, team leads and other employees and provide technical training to all line personnel;
  • Complete special projects: Such as rebuilding machines, replacing/adding needed equipment, or designing and implementing machine changes (refer to specific department duties);
  • Document time spent on each project using CMMS;
  • Inventory and order parts as needed using CMMS Work Orders through SSI;
  • Arrive on production floor 15 minutes prior to start of shift (refer to specific department duties);
  • Clean equipment and perform other custodial responsibilities;
  • Lead TPM methodologies from inception to completion
  • Analyze downtime through the use of information where appropriate.

 Tools and Equipment Used In Job

  • Frequently use wrenches, pliers, screwdrivers, wire cutters, power drills, other hand tools, and machine shop tools; 
  • Occasionally use safety scissors and safety knifes; 
  • Occasionally use large equipment such as pallet jacks (electronic and manual), forklifts, and E-Z lifts.
  • Utilize machine shop equipment (drill presses, band saws, mills, lathes, welder).

 Environmental Factors

  • Machinery may produce noise levels that exceed OSHA’s action level: Employees are provided with and are required to wear personal hearing protection devises in these areas;
  • Moving machinery, such as forklifts: Employees required to operate a forklift must successfully complete forklift operator training;
  • May work in confined spaces: Employees required to work in confined spaces must successfully complete confined space training;
  • All Line Mechanics are provided with and required to wear safety glasses, steel-toed shoes, and may be required to wear100% cotton uniforms; must wear safety gloves.
  • All employees are properly trained in use of adjunct lifting/moving equipment and proper body mechanics. 
  • Complete ARC Flash training and adhere to requirements.

 Essential Functions

MANIPULATION REQUIREMENTS:  (HANDS OR FEET) This position requires an individual to constantly perform one and/or all of the following movements/functions: Handle, reach, feel, perform fine motor manipulations with their hands, and performing gross motor manipulations involved in assembly of machinery and moving equipment.

  • Read, understand, and document specific instructions listed on the preventative maintenance sheet and/or CMMS;
  • Work independently, make decisions, and use adequate organizational and time management skills;
  • Perform the physical demands listed in the “Physical Demands” section using safe ergonomic techniques;  
  • Have working knowledge of the production process, items produced, and equipment utilized in maintaining production within specific industrial norms and standards; 
  • Communicate well with other employees and Cell Managers and Team Leads;
  • Possess good technical skills in a majority of the following fields: Mechanical repair, electrical/electronic diagnosis, electronic program revision and development, failure analysis, pneumatic/hydraulic systems, welding, basic machine shop practices, PLC troubleshooting/programming;
  • Have good mechanical aptitude, proven by the Standard Timing Model Test;
  • Look for equipment inefficiencies/failures and for methods of improving the existing operations; 
  • Maintain a telephone, radio or message system to ensure communication in the event of an emergency situation;  
  • Have visual/auditory acuity required to see/hear maintenance requests and warning alarms;
  • Maintain a safe work environment and follow all safety procedures;
  • Work well as a team member and/or independently as required;
  • Work flexible hours/shifts, including overtime;
  • Demonstrate good attendance.

 Marginal Job Duties:

  • Lift in excess of 50 lbs. 


  •  Must produce World Class Results through teamwork.
  • Must selflessly develop others through training.
  • Must thrive within a changing organization.
  • Efficiently produce quality cosmetics in the right quality at the right time for L’Oreal USA customers.
  • Must create and provide an environment in which employees can work safely and thrive.
  • Must act as a responsible citizen in our company and community.
  • Must manage the plant’s assets to maximize our stockholders return.
  • Must demonstrate a 100% responsibility and not make excuses or cast blame.
  • Must implement and utilize the NLR L’Oreal USA communication model.
  • Resolve conflicts directly.
  • Must listen for understanding.
  • Must have a positive attitude.
  • Must be committed to team decisions.
  • Must Communicate effectively.


We are an Equal Opportunity Employer and take pride in a diverse environment. We do not discriminate in recruitment, hiring, training, promotion or other employment practices for reasons of race, color, religion, gender, sexual orientation, national origin, age, marital or veteran status, medical condition or disability, or any other legally protected status.

If you require a reasonable accommodation to complete an application for a recognized disability under applicable law, please email [email protected]. Please note this email will only respond to specific requests for assistance completing the application as a request for accommodation for a disability. All others will not be considered.